Part Number Hot Search : 
NCP1588 MM5ZB13H 74HCT PD6626SM 01006 MGF1902B R39MF5 20100C
Product Description
Full Text Search
 

To Download FL-101 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  data brief for further information contact your local stmicroelectronics sales office. october 2011 doc id 022303 rev 1 1/3 3 FL-101 flashlink jtag programmer features allows pc or notebook pa rallel port to program upsd and psd devices using psdsoft express software development tool. supports ieee 1149.1 jtag signals (tck, tms, tdi, tdo). supports additional signals (terr and tstat) to reduce programming time. single flashlink cable assembly supports both 3.3 v and 5 v target devices with no manual configuration. target device may operate from 2.7 v to 5.5 v. flying lead cable included to adapt to any target connector using 0.025" square posts. loop test cable included to validate pc parallel port operation. description the FL-101 is a flashlink jtag programming cable for psd and upsd microcontroller families. driven by a pc through a parallel port, it allows in-system programming (isp) of psd and upsd devices located on an application board. table 1. device summary reference order code flashlink jtag programmer FL-101 www.st.com
ordering information FL-101 2/3 doc id 022303 rev 1 ordering information the FL-101 can be ordered from your nearest st distributor or sales office (st order code: FL-101). for more information and complete documentation, please refer to the stmicroelectronics microcontroller support site on www.st.com. revision history table 2. document revision history date revision changes 03-oct-2011 1 initial release.
FL-101 doc id 022303 rev 1 3/3 please read carefully: i nformation in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st? ) reserve th e r ight to make changes, corrections, modifications or improvements, to this document, and the products and services described her ein at an y t ime, without notice. a ll st products are sold pursuant to st?s terms and conditions of sale. p urchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st ass umes n o l iability whatsoever relating to the choice, selection or use of the st products and services described herein. n o license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. if any part of th is d ocument refers to any third party products or services it shall not be deemed a license grant by st for the use of such third p arty produc ts o r services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoeve r of suc h t hird party products or services or any intellectual property contained therein. u nless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implie d w arranty with respect to the use and/or sale of st products including without limitation implie d w arranties of merchantability, fitness for a parti cular purpose (and their equivalents under the law s o f any jurisdiction), or infringement of any patent, copyright or other intellectual property right. u nless expressly approved in writing by two authorized st representatives, st products are no t r ecommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustainin g a pplications, nor in products or systems where failure or malfunction may result in personal injur y, d eath, or severe property or environmental damage. st products which are not specified as "automotiv e g rade" may only be used in automotive applications at user?s own risk. r esale of st products with provisions different from the statements and/or technical features set forth in this document shall i mmediately vo id a ny warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoeve r, an y l iability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2011 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com


▲Up To Search▲   

 
Price & Availability of FL-101

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X